Highlight:
Single Stage Baseplate Pump
, Low Pressure Baseplate Pump
, Wilo single stage double suction centrifugal pump
Single Stage Low Pressure Centrifugal Baseplate Pump Double Suction Wilo CronoNorm NLG
-
Energy-efficient operation: The IE3/IE4 motor technology is adopted, and the optimized efficiency reduces the life cycle cost.
-
Good mechanical seal performance: Bidirectional, force-flushed mechanical seal.
-
Component characteristics: Replaceable neck rings, permanently lubricated and generously sized ball bearings, low NPSH value, and good cavitation characteristics.
-
High-efficiency energy-saving and long-life design: The improved hydraulics ensures high overall efficiency, the IE3/IE4 motor saves energy, and the easily replaceable and standardized components (such as spacer couplings, bronze neck rings) extend the service life.
The performance curve chart of the pump is provided, showing the change of head (H/m) of different models at different flow rates (Q/m³/h).
Single-stage, low-pressure centrifugal pump with axial suction, mounted on a baseplate.
Used for pumping heating water (in accordance with VDI 2035), chilled water, and water/glycol mixtures without abrasive substances in heating, chilled water, and cooling systems.
Applicable in irrigation, building services, general industry, power stations, and other fields.
Single-stage low-pressure centrifugal pump in monobloc design, equipped with coupling, coupling guard, motor, and baseplate. Mechanical shaft seal or stuffing box can be selected.
-
Permissible temperature range: -20°C to +120°C.
-
Mains connection: 3~400V, 50Hz.
-
Protection class: IP55.
-
Nominal diameter: DN 150 to DN 300.
-
Max. operating pressure: 16 bar.
-
Pump housing and pressure lid: EN - GJS - 500 - 7.
-
Bearing bracket: EN - GJL - 250.
-
Impeller: Standard is EN - GJL - 200, special version is G - CuSn10.
-
Shaft: 1.4028.
-
Stationary wear rings: G - CuSn10.
-
Mechanical seal: AQ1EGG, other mechanical seals can be provided upon request.
Single-stage horizontal spiral housing pump with bearing bracket and exchangeable stationary wear rings. The shaft seal adopts mechanical shaft seals in accordance with EN 12756 or packing stuffing box. The spiral housing has cast pump bases. The bearing of the pump shaft uses greased grooved ball bearings. The shaft coupling has an intermediate sleeve.
-
Pump.
-
Installation and operating instructions.
-
Bare shaft pump, pump on baseplate with coupling and coupling guard, or completely mounted pump on baseplate with electric motor can be provided.
Including installation and operating instructions, certification manuals, group statements (such as REACH statements), etc., providing information such as the document number, version, number of pages, language, and download link (if any).
The specific parameters of various models in the CronoNorm - NLG series are detailed, including product description (such as model, nominal diameter, impeller diameter, rated power, number of poles, etc.), mechanical seal type, rated power (P2) range, weight, and corresponding product number.
Your message must be between 20-3,000 characters!
