Wilo SiFire Fire Water Pumps System Firefighting Pump For Hotels Hospitals

Pressure-boosting systems for firefighting according to EN 12845. Consists of 1 or 2 pumps, depending on the module, with horizontal baseplate - EN 733 - with spacer coupling, electric or diesel motor and a multistage, vertical electric jockey pump.

Fully automatic water supply for fire-fighting systems with sprinklers in domestic, commercial and public buildings, hotels, hospitals, shopping centres and industrial buildings.

• One or two pumps with a horizontal base frame from the series 32-200 to 150-315, with an IE-equivalent standard motor or diesel motor
• With a diaphragm installed directly on the main pump housing to prevent overheating in the event of zero flow
• Jockey pump of Medana CV1-L series with pressure switch and vertical pressure tank 20 l, PN 16
• One switch cabinet per pump, fixed to a robust support structure. Model EC-Fire E for the electric motor and D for the diesel motor, both equipped with Easy Controller, plus J for the jockey pump
• Base frame made of electro-galvanised steel with height-adjustable holder for the outlet manifold
• Pipework made of steel; painted with epoxy resin. Manifold with flanges
• Shutting gate with safety lock on the discharge side of each pump
• Swing check valve on the discharge side of each pump
• A circuit with dual pressure switch, pressure gauge, swing check valve, valve for the main pump and standby pump for automatic start
• Concentric cone on the discharge side of the main and standby pump, for speed limitation according to the parameters specified in EN 12845
• DN 2" connection for the supply tank of the pumps
• Pressure measurement on the discharge side
• Only for the model with diesel motor:
  • Vibration damping sleeve on the discharge side of the pump
  • Vibration damper under the base frame of the pump
  • Fuel tank with level sensor and sufficient volume for six hours of autonomous operation
  • Two batteries on the base frame and battery charger in the EC-Fire switchgear
• Accessories upon request: Note on fluids: Approved fluids are generally waters which do not attack the materials used, neither chemically nor mechanically, and do not contain any abrasive or long-fibre constituents. System in accordance with EN 12845
  • Horizontal 500 l supply tank, with float valve and pressure switch for LL-alarm (water shortage)
  • Flow meter: Kit with eccentric cone on the suction side, complete with butterfly valve with hand lever or handwheel
  • Vacuum gauge with valve
  • Valves with electrical contact
  • Vibration damping sleeve for the manifold
  • Remote control panel for transmitting level A and level B alarms
  • Density meter for battery
  • Spare parts kit for the diesel motor
  • Silencer (30 dBA) for the diesel motor
  • Hydraulic heat exchanger for the diesel motor