MOQ: | 1 |
Price: | Negotiable |
Standard Packaging: | Standard Export Plywood Case or Carton |
Delivery Period: | 5-8 weeks |
Payment Method: | L/C,D/A,D/P,T/T,Western Union,MoneyGram |
Supply Capacity: | Peak Season Lead Time: 1-3 months Off Season Lead Time: 1 month |
TPE3 100-180 S-A-F-A-BQQE-IWB
A close-coupled single-stage volute pump with coaxial suction and discharge ports of the same diameter. The water pump has an upper pull-out design. For example, the power head (motor, pump head and impeller) can be disassembled for maintenance while the pump casing remains connected to the pipeline. The shaft seal complies with the DIN EN 12756 standard. The connection of the pipeline is achieved through PN 16 DIN flanges (in accordance with the EN 1092-2 and ISO 7005-2 standards). An air-cooled permanent magnet synchronous motor is installed on the water pump. According to the IEC 60034-30-2 standard, the energy efficiency of this motor is at the IE5 level. A frequency converter and a PI controller are included in the terminal box of the motor. This enables the system to continuously adjust the rotational speed of the motor, allowing the water pump to be adjusted to the optimal operating state according to the environmental conditions. A combined temperature and differential pressure sensor is installed on the water pump.
|
![]() |
![]() |
MOQ: | 1 |
Price: | Negotiable |
Standard Packaging: | Standard Export Plywood Case or Carton |
Delivery Period: | 5-8 weeks |
Payment Method: | L/C,D/A,D/P,T/T,Western Union,MoneyGram |
Supply Capacity: | Peak Season Lead Time: 1-3 months Off Season Lead Time: 1 month |
TPE3 100-180 S-A-F-A-BQQE-IWB
A close-coupled single-stage volute pump with coaxial suction and discharge ports of the same diameter. The water pump has an upper pull-out design. For example, the power head (motor, pump head and impeller) can be disassembled for maintenance while the pump casing remains connected to the pipeline. The shaft seal complies with the DIN EN 12756 standard. The connection of the pipeline is achieved through PN 16 DIN flanges (in accordance with the EN 1092-2 and ISO 7005-2 standards). An air-cooled permanent magnet synchronous motor is installed on the water pump. According to the IEC 60034-30-2 standard, the energy efficiency of this motor is at the IE5 level. A frequency converter and a PI controller are included in the terminal box of the motor. This enables the system to continuously adjust the rotational speed of the motor, allowing the water pump to be adjusted to the optimal operating state according to the environmental conditions. A combined temperature and differential pressure sensor is installed on the water pump.
|
![]() |