logo
Tianjin Shiny-Metals Technology Co., Ltd.
products
products
Home > products > Drainage Pump > Submersible Swimming Pool Water Drain Pump Wilo Drain TMT For Wastewater

Submersible Swimming Pool Water Drain Pump Wilo Drain TMT For Wastewater

Product Details

Place of Origin: Germany

Brand Name: Wilo

Model Number: Drain TMT

Payment & Shipping Terms

Minimum Order Quantity: 1

Price: $ 200 - 1000

Packaging Details: Wooden box

Delivery Time: 15--60 workdays

Payment Terms: L/C,D/P,D/P,T/T

Get Best Price
Highlight:

Wilo swimming pool water drain pump

,

Wastewater swimming pool water drain pump

,

Wilo-Drain TMT

Sealing Type:
Mechanical Seal
Max Head:
10m
Power Source:
Electric
Application:
Drainage
Inlet/Outlet Diameter:
1 Inch
Frequency:
50Hz/60Hz
Model:
DP-100
Power:
750W
Warranty:
1 Year
Protection Level:
IPX4
Material:
Stainless Steel
Max Flow:
100L/min
Voltage:
110V/220V
Sealing Type:
Mechanical Seal
Max Head:
10m
Power Source:
Electric
Application:
Drainage
Inlet/Outlet Diameter:
1 Inch
Frequency:
50Hz/60Hz
Model:
DP-100
Power:
750W
Warranty:
1 Year
Protection Level:
IPX4
Material:
Stainless Steel
Max Flow:
100L/min
Voltage:
110V/220V
Submersible Swimming Pool Water Drain Pump Wilo Drain TMT For Wastewater

Wilo-Drain TMT Submersible Drainage Pump for Wastewater with High Temperature Resistance and Temperature Monitoring

 

Your advantages Temperature resistance for fluid temperatures up to 95 °C High operational reliability due to motor temperature monitoring and sealed cable inlet

 

Design Submersible drainage pump Application Pumping of Wastewater with a maximum fluid temperature of 95 °C Equipment/function Connection cable for fluids up to 95 °C, permanently connected Winding temperature monitoring with bimetallic strip

 

Typekey Technical data Mains connection: 3~400 V, 50 Hz Protection class: IP68 Max. immersion depth: 7 m Fluid temperature: Immersed: 3 … 95 °C Non-immersed: 3 ... 60 °C Cable length: 10 m Pressure port: G 1¼ Materials Pump housing: EN-GJL-250 Impeller: EN-GJL-250 Shaft: 1.4021 Mechanical seal: SiC/SiC; Cr/MgSi Static gaskets: HNBR Motor housing: EN-GJL-250

 

 

Construction

Fully submersible drainage pump for vertical wet well installation to pump fluids with temperatures of up to max. 95°C.

 

Hydraulics

The hydraulics housing and the impeller are made of cast iron. The connection on the pressure side is designed as horizontal threaded flange connection.

 

Motor

Three-phase current surface-cooled motors for direct starting are used as the motors. The waste heat is given off directly to the surrounding fluid via the motor housing. These motors can be operated immersed in continuous duty (S1) and non-immersed in intermittent operation (S3).

 

Furthermore the motors are equipped with the following monitoring devices:

  • Leakage detection motor compartment: The leakage detection signals water ingress into the motor compartment.

  • Thermal motor monitoring: The thermal motor monitoring protects the motor windings against overheating. Bimetallic strips are used for this as standard.

The connection cable has bare cable ends and a length of 10 m as standard, and is available in following versions: Seal The fluid-side and motor-side seal is provided by two mechanical seals. The sealing chamber between the mechanical seals is filled with medical white oil. Scope of delivery Submersible drainage pump Installation and operating instructions

Accessories Connection cable Motor protection plug Switchgears

image.png微信图片_20250108105625.jpg