Grundfos BMS Hs AC Horizontal Multi Stage Pump Top Choice For 20 °C Liquid Temperature In Industrial Applications

BMS 60-17 HS-B-C-P-A-A

BMS hs AC is a high-speed pump with an asynchronous motor. It is suitable for applications where a high flow and a high pressure is required. Therefore, BMS hs AC is ideal for water treatment plants, pressure boosting, nano filtration, high-pressure cleaning, and liquid transfer.

BMS hs AC pumps are available in five sizes: BMS hs 7, BMS hs 18, BMS hs 30, BMS hs 46 and BMS hs 60.
Depending on its size, the flow rate of a BMS hs AC pump ranges between 12 and 98 m3/h. BMS hs AC pumps can increase the system pressure up to 82.7 bar.

The pump is supplied with a built-in non-return valve, a service connector, an asynchronous high-speed motor, and 3-inch  couplings. The motor is protected by output filters against overvoltage and increased operating temperature. As a result, BMS hs AC is very reliable and durable. If maintenance or alignment is needed, BMS hs AC requires only three tools for dismantling, and the shaft seal and thrust bearing are easily accessible.

The stainless-steel pump housing ensures an excellent resistance against corrosive liquids. The overall design of the pump allows applications for different types of water, such as brackish water and sea water.

The enclosure class of the high-speed asynchronous motor is IP54. The motor power ranges from 30 to 180 kW. A space heater or an anti-condensation heater is available as an optional accessory. The motor is controlled by a frequency converter and protected by Pt100 sensors. The frequency converter is sold as a separate accessory and must be purchased along with the pump. We recommend a Grundfos CUE frequency converter; however, frequency converters from alternative suppliers can be used as well.

Horizontal multistage pump BMS 60 - 17 HS - B - C - P - A - A Number: 99022850 Suitable for Industrial water supply and transportation Seawater desalination Drinking water treatment High - pressure pumps for reverse osmosis and filtration applications, driven by an asynchronous motor.

• Liquid conveyed: Water
• Liquid temperature range: 0.. 40 °C
• Liquid temperature during operation: 20 °C
• Density: 998.2 kg/m³

• Rated flow: 94 m³/h
• Rated head: 540 meters
• Rated flow: 60 m³/h
• Approvals: CE, TR
• Curve tolerance: ISO9906:2012 3B

• Pump: Stainless steel
  • EN 1.4539
  • AISI 904L
• Impeller: Stainless steel
  • EN 1.4539
  • AISI 904L
• Motor: Cast iron
• Sleeve: Super Duplex/Duplex steel
  • AISI 318 LN
  • EN 1.4462/1.4410
• Shaft seal: Silicon Carbide/Carbon

• Maximum ambient temperature: 40 °C
• Minimum inlet pressure: 1 bar
• Maximum permissible inlet pressure: 65 bar
• Maximum permissible outlet pressure: 82.7 bar
• Inlet and outlet: 3"/D88.9
• Flange size for motor: FF 500

• Motor model: MMG
• Frame size: 250
• Rated power - P2: 180 kW
• Power supply frequency: 50 Hz
• Rated voltage: 3 x 400 V
• Rated current: 330 A
• Rated speed: 5000 revolutions per minute
• Motor full - load efficiency: 92.9 %
• Number of motor poles: 4

• Net weight: 646 kg
• Gross weight: 799 kg
• Transport volume: 2.3 m³