EINZELHEITEN ZU DEN PRODUKTEN

Haus > Produits >

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Chemical Fiber Melt

Produits

Messpumpe

Treten Sie mit uns in Verbindung

Kontakt jetzt

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Chemical Fiber Melt

MOQ:	1
Preis:	Verhandelbar
Standardverpackung:	Standard -Export -Sperrholzkoffer oder Karton
Lieferfrist:	5-8 Wochen
Zahlungsmethode:	L/C, D/A, D/P, T/T, Western Union
Lieferkapazität:	Spitzensaison: 1-3 Monate, Nebensaison: 1 Monat

Ausführliche Information

Produkt-Beschreibung

Ausführliche Information

Markenname

Modellnummer

HRA-1,6*6-2

Hauptgebrauch:

Polyester-, Nylon-Filament-Spinndosierung

Struktur:

1 Einlass, 6 Auslässe

Verschiebung pro Port pro Umdrehung:

1,6 cm³/Umdr

Gesamtverdrängung (6 Anschlüsse):

9,6 cm³/Umdr

Arbeitsdruck:

Einlass: ≤20 MPa; Auslass: ≤40 MPa

Arbeitstemperatur:

≤320℃

Viskosität der Spinnflüssigkeit:

≤4000 Poise

Arbeitsgeschwindigkeit:

5~40 U/min

Einlasshafengröße:

φ15 mm

Größe des Auslassanschlusses:

6 × φ6,4 mm

Spezifikation des Montageloches:

3 × φ12,5 mm

Antriebsachsendurchmesser:

φ20 mm

Hervorheben:

high pressure spinning gear pump

high temperature metering pump

chemical fiber melt pump

Produkt-Beschreibung

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Chemical Fiber Melt

This 1-inlet 6-outlet precision spinning gear pump is high-precision metering and conveying equipment specially designed for chemical fiber spinning processes. With precision gear meshing structure, it provides uniform flow distribution from a single inlet to 6 outlets, delivering stable and accurate melt/oil agent conveying for polyester, nylon, and other filament spinning processes. As a core component ensuring uniformity and continuity of spinning finished products, it is widely suitable for high-viscosity fluid metering scenarios across multiple industries.

Technical Specifications

Item	Specification
Model	HRA-1.6*6-2
Main Use	Polyester, Nylon Filament Spinning
Structure	1 Inlet, 6 Outlets
Displacement per Port per Revolution	1.6 cc/rev
Total Displacement	9.6 cc/rev
Working Speed	5-40 rpm
Working Pressure	Inlet ≤20 MPa; Outlet ≤40 MPa
Working Temperature	≤320 ºC
Suitable Viscosity	≤4000 POISE
Mounting Screw	M12
Dimension A (Pump Body Length)	105.5 mm
Dimension B (Total Length with Shaft)	113.5 mm
Overall Dimensions (L×W×H)	113.5 × 60 × 52 mm
Inlet Port Size	Φ15 mm
Outlet Port Size	6 × Φ6.4 mm
Drive Shaft Diameter	Φ20 mm
Mounting Hole Specification	3 × Φ12.5 mm

Main Applications

Core Industries: Chemical, chemical fiber, food, biology, medicine, etc.
Core Processes: Spinning forming of polypropylene, nylon, spandex, aramid, non-woven fabric, acetate fiber, etc.
Extended Applications: Precision oil metering, high-viscosity fluid booster conveying, special material extrusion supporting, etc.

Product Advantages

High metering accuracy: Uniform flow at 6 outlets with minimal error, eliminating uneven spinning thickness and broken filaments
High pressure and temperature resistance: Maximum outlet pressure of 40MPa, temperature resistance up to 320ºC, suitable for high-temperature and high-pressure spinning working conditions
Strong high-viscosity adaptability: Can transport high-viscosity spinning melt up to 4000POISE, meeting stringent chemical fiber industry requirements
Complete specifications: Full displacement coverage of 0.8~4.5cc/rev, accurately matching spinning lines with different production capacities and processes
Standardized installation: Unified mounting flange and screw specifications for all models, facilitating line transformation and maintenance

Structural Interface Features

Mounting Flange: Φ60mm standard flange, 3 Φ12.5mm mounting holes
Shaft End Specification: Φ20mm output shaft, shaft extension length 14.38mm
Interface Specification: 1 Φ15mm inlet, 6 Φ6.4mm outlets

Model Specifications

Model	Output per Port per Revolution (cc/rev)	Dimension A (mm)	Dimension B (mm)	Mounting Screw
HRA-0.8*6-2	0.8	99.9	119.9	M12
HRA-1.2*6-2	1.2	101.2	109.2	M12
HRA-1.4*6-2	1.4	103.4	111.4	M12
HRA-1.6*6-2	1.6	105.5	113.5	M12
HRA-1.8*6-2	1.8	107.6	115.6	M12
HRA-2*6-2	2.0	109.7	117.7	M12
HRA-2.4*6-2	2.4	114.0	122.0	M12
HRA-3*6-2	3.0	127.6	135.6	M12
HRA-3.6*6-2	3.6	134.0	142.0	M12
HRA-4*6-2	4.0	133.5	130.5	M12
HRA-4.5*6-2	4.5	126.8	134.8	M12

After Sales Service

Enjoy peace of mind with our comprehensive after-sales service. We offer a 7-day replacement policy and a 12-month repair service absolutely free of charge for any quality-related issues, ensuring your complete satisfaction and confidence in our products.

Company Profile

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements
Complete product documents (operation manual, test report, quality certificate) provided with each shipment

Frequently Asked Questions

Q1: What is your terms of packing?

A1: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q2: How about your delivery time?

A2: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q3: What's your MOQ?

A3: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q4: How do you ensure good product quality?

A4: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q5: How long your quotation valid?

A5: Our quotation valid for 1 month.

Q6: Can you accept OEM brand?

A6: Yes, we can accept the OEM brand without extra charge.

Q7: How long is your product warranty?

A7: 7 days replacement and 12 months repair free of charge for quality problem.

Q8: Can you produce according to the samples?

A8: Yes, we can produce by your samples or technical drawings.

Umbauten:

HRB/JRG-Serie Spinnmaschinenpumpe,

Aramidfaser Spinnmaschinenpumpe,

chemische Faserspinnpumpe

Empfohlene Produkte

6-Outlet Gear Dosing Pump for Polypropylene/Nylon/Spandex Fiber Spinning Line

Kontakt jetzt

5-Outlet Gear Dosing Pump for Polypropylene/Spandex/Aramid Fiber Spinning Line

Kontakt jetzt

Hra Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

Kontakt jetzt

5-Outlet Gear Dosing Pump for Polypropylene/Spandex/Aramid Fiber Spinning Line

Kontakt jetzt

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Melt Metering

Kontakt jetzt

1.2~5.0cc/Rev Precision Spinning Metering Pump for High Viscosity Fluid

Kontakt jetzt

Hra Series 1-Inlet 5-Outlet Precision Spinning Metering Gear Pump for Chemical Fiber

Kontakt jetzt

EINZELHEITEN ZU DEN PRODUKTEN

Produits

Wasserumwälzungspumpe

Landwirtschafts-Wasser-Pumpe

Wasserversorgungspumpe

grundfos Umwälzpumpe

Abwasserpumpe

Feuerbekämpfungssystem

Frischluftsystem

Kreiselpumpe

Förderpumpen

abb Antriebe

Vertikaler Schleifplatz

Inline-Boosterpumpe

Plattenwärmetauscher

Wärmetauscher

Messpumpe

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Chemical Fiber Melt

MOQ:	1
Preis:	Verhandelbar
Standardverpackung:	Standard -Export -Sperrholzkoffer oder Karton
Lieferfrist:	5-8 Wochen
Zahlungsmethode:	L/C, D/A, D/P, T/T, Western Union
Lieferkapazität:	Spitzensaison: 1-3 Monate, Nebensaison: 1 Monat

Ausführliche Information

Produkt-Beschreibung

Ausführliche Information

Markenname

ZRQH

Modellnummer

HRA-1,6*6-2

Hauptgebrauch:

Polyester-, Nylon-Filament-Spinndosierung

Struktur:

1 Einlass, 6 Auslässe

Verschiebung pro Port pro Umdrehung:

1,6 cm³/Umdr

Gesamtverdrängung (6 Anschlüsse):

9,6 cm³/Umdr

Arbeitsdruck:

Einlass: ≤20 MPa; Auslass: ≤40 MPa

Arbeitstemperatur:

≤320℃

Viskosität der Spinnflüssigkeit:

≤4000 Poise

Arbeitsgeschwindigkeit:

5~40 U/min

Einlasshafengröße:

φ15 mm

Größe des Auslassanschlusses:

6 × φ6,4 mm

Spezifikation des Montageloches:

3 × φ12,5 mm

Antriebsachsendurchmesser:

φ20 mm

Min Bestellmenge:

Preis:

Verhandelbar

Verpackung Informationen:

Standard -Export -Sperrholzkoffer oder Karton

Lieferzeit:

5-8 Wochen

Zahlungsbedingungen:

L/C, D/A, D/P, T/T, Western Union

Versorgungsmaterial-Fähigkeit:

Spitzensaison: 1-3 Monate, Nebensaison: 1 Monat

Hervorheben

high pressure spinning gear pump

high temperature metering pump

chemical fiber melt pump

Produkt-Beschreibung

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Chemical Fiber Melt

Technical Specifications

Item	Specification
Model	HRA-1.6*6-2
Main Use	Polyester, Nylon Filament Spinning
Structure	1 Inlet, 6 Outlets
Displacement per Port per Revolution	1.6 cc/rev
Total Displacement	9.6 cc/rev
Working Speed	5-40 rpm
Working Pressure	Inlet ≤20 MPa; Outlet ≤40 MPa
Working Temperature	≤320 ºC
Suitable Viscosity	≤4000 POISE
Mounting Screw	M12
Dimension A (Pump Body Length)	105.5 mm
Dimension B (Total Length with Shaft)	113.5 mm
Overall Dimensions (L×W×H)	113.5 × 60 × 52 mm
Inlet Port Size	Φ15 mm
Outlet Port Size	6 × Φ6.4 mm
Drive Shaft Diameter	Φ20 mm
Mounting Hole Specification	3 × Φ12.5 mm

Main Applications

Core Industries: Chemical, chemical fiber, food, biology, medicine, etc.
Core Processes: Spinning forming of polypropylene, nylon, spandex, aramid, non-woven fabric, acetate fiber, etc.
Extended Applications: Precision oil metering, high-viscosity fluid booster conveying, special material extrusion supporting, etc.

Product Advantages

High metering accuracy: Uniform flow at 6 outlets with minimal error, eliminating uneven spinning thickness and broken filaments
High pressure and temperature resistance: Maximum outlet pressure of 40MPa, temperature resistance up to 320ºC, suitable for high-temperature and high-pressure spinning working conditions
Strong high-viscosity adaptability: Can transport high-viscosity spinning melt up to 4000POISE, meeting stringent chemical fiber industry requirements
Complete specifications: Full displacement coverage of 0.8~4.5cc/rev, accurately matching spinning lines with different production capacities and processes
Standardized installation: Unified mounting flange and screw specifications for all models, facilitating line transformation and maintenance

Structural Interface Features

Mounting Flange: Φ60mm standard flange, 3 Φ12.5mm mounting holes
Shaft End Specification: Φ20mm output shaft, shaft extension length 14.38mm
Interface Specification: 1 Φ15mm inlet, 6 Φ6.4mm outlets

Model Specifications

Model	Output per Port per Revolution (cc/rev)	Dimension A (mm)	Dimension B (mm)	Mounting Screw
HRA-0.8*6-2	0.8	99.9	119.9	M12
HRA-1.2*6-2	1.2	101.2	109.2	M12
HRA-1.4*6-2	1.4	103.4	111.4	M12
HRA-1.6*6-2	1.6	105.5	113.5	M12
HRA-1.8*6-2	1.8	107.6	115.6	M12
HRA-2*6-2	2.0	109.7	117.7	M12
HRA-2.4*6-2	2.4	114.0	122.0	M12
HRA-3*6-2	3.0	127.6	135.6	M12
HRA-3.6*6-2	3.6	134.0	142.0	M12
HRA-4*6-2	4.0	133.5	130.5	M12
HRA-4.5*6-2	4.5	126.8	134.8	M12

After Sales Service

Company Profile

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements
Complete product documents (operation manual, test report, quality certificate) provided with each shipment

Frequently Asked Questions

Q1: What is your terms of packing?

A1: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q2: How about your delivery time?

A2: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q3: What's your MOQ?

A3: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q4: How do you ensure good product quality?

A4: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q5: How long your quotation valid?

A5: Our quotation valid for 1 month.

Q6: Can you accept OEM brand?

A6: Yes, we can accept the OEM brand without extra charge.

Q7: How long is your product warranty?

A7: 7 days replacement and 12 months repair free of charge for quality problem.

Q8: Can you produce according to the samples?

A8: Yes, we can produce by your samples or technical drawings.

Umbauten: