DETALLES DE LOS PRODUCTOS

Hogar > Productos >

Jrg Series (6-30cc/rev) Staple Fiber Spinning Pump High Temp & Pressure Resistant

Productos

Bomba de recirculación de agua

Bomba de agua de la agricultura

bomba de circulación de los grundfos

sistema de la lucha contra el fuego

Centro de rectificado vertical

Intercambiador de calor de placa

Jrg Series (6-30cc/rev) Staple Fiber Spinning Pump High Temp & Pressure Resistant

MOQ:	1
Precio:	Negociable
Embalaje Estándar:	Estuche de madera contrachapada de exportación estándar o cartón
Período De Entrega:	5-8 semanas
Método De Pago:	LC, D/A, D/P, T/T, Unión Occidental
Capacidad De Suministro:	Tiempo de entrega en temporada alta: 1-3 meses; Tiempo de entrega fuera de temporada: 1 mes

Información detallada

Descripción de producto

Información detallada

Nombre de la marca

Número de modelo

JRG-10

Forma:

Una entrada y una salida

Desplazamiento (tasa de dosificación por revolución):

10 cc/Rev (por puerto)

Presión de funcionamiento:

Entrada: ≤20MPa; Salida: ≤40MPa

Temperatura de funcionamiento:

≤320 ℃

Viscosidad del fluido de hilatura:

≤4000 equilibrio

Velocidad de funcionamiento:

5~40 rpm

Dimensiones del puerto:

Entrada: φ18 mm; Salida: φ13mm

Agujeros de montaje:

2×φ13mm (dispuestos simétricamente)

Aplicación principal:

Hilatura de fibras discontinuas

Estructura:

Bomba dosificadora de engranajes rectangulares, entrada única y pecado

Material:

Acero para herramientas de alta velocidad/aleación resistente al desgaste

Velocidad de trabajo:

10-40 rpm

Presión de entrada:

≥ 0,5MPa

Presión de salida:

≤ 40 MPa

Resaltar:

staple fiber spinning metering pump

high temperature resistant metering pump

high pressure resistant spinning pump

Descripción de producto

JRG Series (6-30cc/rev) Staple Fiber Spinning Pump

The JRG Series is a range of high-precision gear metering pumps specifically designed for the stable and accurate delivery of high-viscosity fluids. Ideal for high-temperature and high-pressure operating conditions, it is widely applied in chemical fiber, chemical engineering, and hot melt adhesive industries.

Technical Specifications

Model	JRG-10
Displacement	10 cc/rev
Structure	Rectangular gear metering pump, single inlet & single outlet
Material	High-speed tool steel / wear-resistant alloy
Working Speed	10-40 rpm
Inlet Pressure	≥ 0.5 MPa
Outlet Pressure	≤ 40 MPa
Max Pressure Difference	≤ 40 MPa
Working Temperature	≤ 320 ºC
Cleaning Temperature	≤ 450 ºC
Metering Accuracy	within ±1%
Applicable Viscosity	High viscosity melt (PET, PA, PP, etc.)
Inlet & Outlet	1 inlet, 1-4 outlets

Main Applications

Textile Industry: Staple fiber spinning
Industrial Fluids: Glue dispensing, oil agent conveying, hydraulic pressure, pipeline pressurization, extruder booster delivery
Special Materials: Polyurethane (PU), PC foaming machine, PUR hot melt adhesive metering
Surface Treatment: Spraying, coating, precision glue metering

Product Advantages

High Precision Metering: Gear-driven technology ensures minimal flow variation, meeting the strict accuracy requirements of spinning processes.
Extreme Environment Adaptation: Withstands high temperatures up to 320ºC and outlet pressures up to 40 MPa, ensuring reliability in harsh industrial environments.
High Viscosity Capability: Efficiently handles fluids up to 4000 POISE, covering the majority of spinning melts and industrial adhesives.
Easy Integration & Maintenance: Universal installation dimensions facilitate easy equipment replacement and system integration.

Structural Interface Features

Interface Layout: Standard one-inlet, one-outlet design (Inlet: Φ18, Outlet: Φ13)
Mounting Standard: Shared mounting dimensions (A & B consistent across models) with M16 mounting screws
Material & Construction: Precision machined all-metal stainless steel structure. Features external meshing gears for superior flow stability.

Why Choose Our JR Series Metering Pump?

Customization Support: We accept custom displacement, interface, and material requirements to meet special working conditions.
Quality Assurance: Strict factory testing ensures stable performance and long service life, reducing maintenance costs.
Professional Service: We provide technical consultation, installation guidance, and after-sales support to ensure smooth equipment operation.
Cost-Effective: High-precision metering reduces material waste, improving production efficiency and product quality.

After Sales Service

Enjoy peace of mind with our comprehensive after-sales service. We offer a 7-day replacement policy and a 12-month repair service absolutely free of charge for any quality-related issues, ensuring your complete satisfaction and confidence in our products.

Company Profile

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation.
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements.
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment.

Frequently Asked Questions

What can you buy from us?

We can provide one-stop flow meter services, providing sales of instruments such as flow meters, liquid level gauges, vacuum gauges, pumps, sensors, industrial thermometers, etc.

What is your terms of packing?

Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

How about your delivery time?

Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

What's your MOQ?

We have no MOQ demand, 1 piece for test purpose at first is acceptable.

How do you ensure good product quality?

We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

How long your quotation valid?

Our quotation valid for 1 month.

Can you accept OEM brand?

Yes, we can accept the OEM brand without extra charge.

How long is your product warranty?

7 days replacement and 12 months repair free of charge for quality problem.

Can you produce according to the samples?

Yes, we can produce by your samples or technical drawings.

Etiquetas:

La serie HRB/JRG de bombas de engranajes giratorios,

bomba de engranajes de hilado de fibra de aramida,

bomba de hilatura de fibras químicas

Productos recomendados

High Precision Jrg-30 Staple Fiber Spinning Pump 30cc/Rev for Polyurethane/PC Foaming Machine/PUR Hot Melt Adhesive

Contacto ahora

Staple Fiber Spinning Pump Gear Metering Pump for Polyurethane Foaming PUR Hot Melt Adhesive Coating

Contacto ahora

Bomba dosificadora de engranajes de alta precisión para engrase de hilatura de polipropileno/nylon

Contacto ahora

Bomba de engranaje de giro de precisión de entrada y salida 1 y 12 de la serie Jrgy para engrasamiento de alta velocidad de fibras químicas

Contacto ahora

Bomba de engranajes de salida 12 de la serie Jrgy para el aceiteado de fijación de fibra química

Contacto ahora

Bomba de aceite de engranaje de 12 salidas de bajo pulso para la línea de producción de hilado de fibras químicas

Contacto ahora

Bomba de aceite giratoria de precisión Jrgy de 10-40 rpm para dosificación de agente de aceite de alta viscosidad

Contacto ahora

DETALLES DE LOS PRODUCTOS

Productos

Bomba de recirculación de agua

Bomba de agua de la agricultura

Bomba de suministro de agua

bomba de circulación de los grundfos

Bomba de aguas residuales

sistema de la lucha contra el fuego

sistema de aire fresco

Bomba centrífuga

Bombas de aumento de presión

impulsiones del abb

Centro de rectificado vertical

Bomba de refuerzo en línea

Intercambiador de calor de placa

Intercambiador de calor

Bomba de medición

Jrg Series (6-30cc/rev) Staple Fiber Spinning Pump High Temp & Pressure Resistant

MOQ:	1
Precio:	Negociable
Embalaje Estándar:	Estuche de madera contrachapada de exportación estándar o cartón
Período De Entrega:	5-8 semanas
Método De Pago:	LC, D/A, D/P, T/T, Unión Occidental
Capacidad De Suministro:	Tiempo de entrega en temporada alta: 1-3 meses; Tiempo de entrega fuera de temporada: 1 mes

Información detallada

Descripción de producto

Información detallada

Nombre de la marca

ZRQH

Número de modelo

JRG-10

Forma:

Una entrada y una salida

Desplazamiento (tasa de dosificación por revolución):

10 cc/Rev (por puerto)

Presión de funcionamiento:

Entrada: ≤20MPa; Salida: ≤40MPa

Temperatura de funcionamiento:

≤320 ℃

Viscosidad del fluido de hilatura:

≤4000 equilibrio

Velocidad de funcionamiento:

5~40 rpm

Dimensiones del puerto:

Entrada: φ18 mm; Salida: φ13mm

Agujeros de montaje:

2×φ13mm (dispuestos simétricamente)

Aplicación principal:

Hilatura de fibras discontinuas

Estructura:

Bomba dosificadora de engranajes rectangulares, entrada única y pecado

Material:

Acero para herramientas de alta velocidad/aleación resistente al desgaste

Velocidad de trabajo:

10-40 rpm

Presión de entrada:

≥ 0,5MPa

Presión de salida:

≤ 40 MPa

Cantidad de orden mínima:

Precio:

Negociable

Detalles de empaquetado:

Estuche de madera contrachapada de exportación estándar o cartón

Tiempo de entrega:

5-8 semanas

Condiciones de pago:

LC, D/A, D/P, T/T, Unión Occidental

Capacidad de la fuente:

Tiempo de entrega en temporada alta: 1-3 meses; Tiempo de entrega fuera de temporada: 1 mes

Resaltar

staple fiber spinning metering pump

high temperature resistant metering pump

high pressure resistant spinning pump

Descripción de producto

JRG Series (6-30cc/rev) Staple Fiber Spinning Pump

Technical Specifications

Model	JRG-10
Displacement	10 cc/rev
Structure	Rectangular gear metering pump, single inlet & single outlet
Material	High-speed tool steel / wear-resistant alloy
Working Speed	10-40 rpm
Inlet Pressure	≥ 0.5 MPa
Outlet Pressure	≤ 40 MPa
Max Pressure Difference	≤ 40 MPa
Working Temperature	≤ 320 ºC
Cleaning Temperature	≤ 450 ºC
Metering Accuracy	within ±1%
Applicable Viscosity	High viscosity melt (PET, PA, PP, etc.)
Inlet & Outlet	1 inlet, 1-4 outlets

Main Applications

Textile Industry: Staple fiber spinning
Industrial Fluids: Glue dispensing, oil agent conveying, hydraulic pressure, pipeline pressurization, extruder booster delivery
Special Materials: Polyurethane (PU), PC foaming machine, PUR hot melt adhesive metering
Surface Treatment: Spraying, coating, precision glue metering

Product Advantages

High Precision Metering: Gear-driven technology ensures minimal flow variation, meeting the strict accuracy requirements of spinning processes.
Extreme Environment Adaptation: Withstands high temperatures up to 320ºC and outlet pressures up to 40 MPa, ensuring reliability in harsh industrial environments.
High Viscosity Capability: Efficiently handles fluids up to 4000 POISE, covering the majority of spinning melts and industrial adhesives.
Easy Integration & Maintenance: Universal installation dimensions facilitate easy equipment replacement and system integration.

Structural Interface Features

Interface Layout: Standard one-inlet, one-outlet design (Inlet: Φ18, Outlet: Φ13)
Mounting Standard: Shared mounting dimensions (A & B consistent across models) with M16 mounting screws
Material & Construction: Precision machined all-metal stainless steel structure. Features external meshing gears for superior flow stability.

Why Choose Our JR Series Metering Pump?

Customization Support: We accept custom displacement, interface, and material requirements to meet special working conditions.
Quality Assurance: Strict factory testing ensures stable performance and long service life, reducing maintenance costs.
Professional Service: We provide technical consultation, installation guidance, and after-sales support to ensure smooth equipment operation.
Cost-Effective: High-precision metering reduces material waste, improving production efficiency and product quality.

After Sales Service

Company Profile

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation.
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements.
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment.

Frequently Asked Questions

What can you buy from us?

We can provide one-stop flow meter services, providing sales of instruments such as flow meters, liquid level gauges, vacuum gauges, pumps, sensors, industrial thermometers, etc.

What is your terms of packing?

Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

How about your delivery time?

Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

What's your MOQ?

We have no MOQ demand, 1 piece for test purpose at first is acceptable.

How do you ensure good product quality?

We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

How long your quotation valid?

Our quotation valid for 1 month.

Can you accept OEM brand?

Yes, we can accept the OEM brand without extra charge.

How long is your product warranty?

7 days replacement and 12 months repair free of charge for quality problem.

Can you produce according to the samples?

Yes, we can produce by your samples or technical drawings.

Etiquetas: