جزئیات محصولات

خونه > محصولات >

Hrb6 Series Precision Spinning Gear Pump 1-in 6-out High Temp Metering Pump

محصولات

Hrb6 Series Precision Spinning Gear Pump 1-in 6-out High Temp Metering Pump

مقدار تولیدی:	1
قیمت:	قابل مذاکره
بسته بندی استاندارد:	پرونده یا کارتن تخته سه لاو صعود استاندارد
دوره تحویل:	5-8 هفته
روش پرداخت:	L/C، D/A، D/P، T/T، وسترن یونیون
ظرفیت عرضه:	زمان پخش فصل اوج: 1-3 ماه ，زمان ارائه فصل خارج از فصل: 1 ماه

اطلاعات دقیق

توضیحات محصول

اطلاعات دقیق

نام تجاری

شماره مدل

HRB6-5.5

جابجایی در هر خروجی:

5.5 سی سی/ر

پیچ نصب:

حداکثر فشار ورودی:

≤20 مگاپاسکال

حداکثر فشار خروجی:

≤40 Mpa

محدوده سرعت کار:

5 تا 40 دور در دقیقه

مشخصات:

123.1 x 100 x 100 میلی متر

1 ورودی، 10 خروجی

فشار کاری:

ورودی: ≤20MPa؛ خروجی: ≤40MPa

دمای کاری:

≤320 ℃

ویسکوزیته سیال در حال چرخش:

≤4000 پویز

توضیحات محصول

Hrb6 Chemical Fiber Spinning Pump Multi-Position Melt Delivery Gear Pump

The HRB6 series spinning gear pump is a high-precision metering pump specially designed for the chemical fiber industry, widely used in polyester, nylon, polypropylene, spandex, aramid, non-woven fabrics, acetate fiber spinning and oil metering. It is also suitable for industries including chemical, food, biological and pharmaceutical processing.

Item	Specification
Model	HRB6-5.5
Displacement (per outlet)	5.5 cc/rev
Dimension A	79.3 mm
Overall Length (Dimension B)	123.1 mm
Overall Width (Outer Diameter)	100 mm
Overall Height (Outer Diameter)	100 mm
Mounting Screw	M12
Structure	1 Inlet, 6 Outlets
Max Inlet Pressure	≤20 MPa
Max Outlet Pressure	≤40 MPa
Max Working Temperature	≤320ºC
Applicable Viscosity	≤4000 POISE
Working Speed	5~40 rpm

Main Applications

Polyester/Nylon filament spinning production lines for stable melt metering and conveying

Spinning processes for specialty fibers such as polypropylene, spandex, and aramid

Production of non-woven materials like non-woven fabrics and acetate fibers

Metering and conveying of high-viscosity fluids in chemical and pharmaceutical industries

Product Advantages

High Precision Metering: Gear pump design ensures stable, consistent flow, minimizing fiber linear density variation.

High Temperature & Pressure Resistance: Alloy steel construction withstands up to 320ºC and 40MPa outlet pressure, suitable for high-viscosity polymer melts.

Multi-Outlet Design: 1-in 6-out structure supports multi-position spinning, improving production efficiency.

Reliable Sealing: High-temperature hard seal and axial balance design prevent leakage under continuous high-load conditions.

Standardized Installation: Flange mounting with M12 screws for easy integration and replacement on existing spinning equipment.

Model	Displacement (cc/rev)	Dimension A (mm)	Dimension B (Total Length, mm)	Mounting Screw
HRB6-0.6	0.6	62.5	104.5	M12
HRB6-1.2	1.2	64.6	106.6	M12
HRB6-1.8	1.8	66.4	108.4	M12
HRB6-2.0	2.0	67.0	109.0	M12
HRB6-2.4	2.4	68.4	110.4	M12
HRB6-3.0	3.0	70.5	112.5	M12
HRB6-3.6	3.6	72.6	114.6	M12
HRB6-4.0	4.0	74.0	117.8	M12
HRB6-4.5	4.5	75.8	119.6	M12
HRB6-5.0	5.0	77.6	121.3	M12
HRB6-5.5	5.5	79.3	123.1	M12
HRB6-6.0	6.0	81.1	124.9	M12
HRB6-6.5	6.5	82.9	126.7	M12

After Sales Service

Enjoy peace of mind with our comprehensive after-sales service. We offer a 7-day replacement policy and a 12-month repair service absolutely free of charge for any quality-related issues, ensuring your complete satisfaction and confidence in our products.

Company Profile

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation.
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements.
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment.

Frequently Asked Questions

Q1: Are you a factory?

A1: We are based in Shanghai, China, start from 2011. Main production and sales of various industrial flow meters and other products. Welcome to visit!

Q2: What can you buy from us?

A2: We can provide one-stop flow meter services, providing sales of instruments such as flow meters, liquid level gauges, vacuum gauges, pumps, sensors, industrial thermometers, etc.

Q3: What is your terms of packing?

A3: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q4: How about your delivery time?

A4: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q5: What's your MOQ?

A5: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q6: How do you ensure good product quality?

A6: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q7: How long your quotation valid?

A7: Our quotation valid for 1 month.

Q8: Can you accept OEM brand?

A8: Yes, we can accept the OEM brand without extra charge.

Q9: How long is your product warranty?

A9: 7 days replacement and 12 months repair free of charge for quality problem.

Q10: Can you produce according to the samples?

A10: Yes, we can produce by your samples or technical drawings.

برچسب ها:

پمپ چرخ دار سری HRB/JRG,

پمپ چرخ دار فیبر آریامید,

پمپ چرخ دار فیبر شیمیایی

محصولات پیشنهادی

پمپ چرخ دار مقاوم به واسکوزیت بالا 5-40rpm برای اندازه گیری روغن و واسکوز

حالا تماس بگیرید

پمپ اندازه گیری دنده 1 در 4 خروجی برای ریسندگی الیاف غیر بافته و استات

حالا تماس بگیرید

پمپ چرخ دار دقیق سری Jrgy 1-Inlet 4-Outlet برای رشته پلی استر / نایلون

حالا تماس بگیرید

پمپ اندازه گیری فیبر چرخش شیمیایی با فشار بالا (0.8-3cc/r Displacement)

حالا تماس بگیرید

پمپ دنده چرخشی دقیق سری 1 ورودی 6 خروجی Jrgy برای رشته پلی استر/نایلون

حالا تماس بگیرید

پمپ اندازه گیری فشار بالا (≤40MPa) برای اندازه گیری روغن و فیبر اسیتات

حالا تماس بگیرید

پمپ چرخ دار فیبر شیمیایی چند خروجی با 6 پورت برای چرخش پلی استر و اسپاندکس

حالا تماس بگیرید

جزئیات محصولات

محصولات

پمپ بازگردانی آب

کشاورزی پمپ آب

پمپ آب

پمپ گردش خون Grundfos

پمپ فاضلاب

سیستم اطفای حریق

سیستم هوای تازه

پمپ سانتریفیوژ

بوستر پمپ

درایوهای ABB

مرکز تراش عمودی

پمپ تقویت کننده در خط

مبدل حرارتی صفحه ای

مبدل

پمپ سنجش

Hrb6 Series Precision Spinning Gear Pump 1-in 6-out High Temp Metering Pump

مقدار تولیدی:	1
قیمت:	قابل مذاکره
بسته بندی استاندارد:	پرونده یا کارتن تخته سه لاو صعود استاندارد
دوره تحویل:	5-8 هفته
روش پرداخت:	L/C، D/A، D/P، T/T، وسترن یونیون
ظرفیت عرضه:	زمان پخش فصل اوج: 1-3 ماه ，زمان ارائه فصل خارج از فصل: 1 ماه

اطلاعات دقیق

توضیحات محصول

اطلاعات دقیق

نام تجاری

ZRQH

شماره مدل

HRB6-5.5

جابجایی در هر خروجی:

5.5 سی سی/ر

پیچ نصب:

M12

حداکثر فشار ورودی:

≤20 مگاپاسکال

حداکثر فشار خروجی:

≤40 Mpa

محدوده سرعت کار:

5 تا 40 دور در دقیقه

مشخصات:

123.1 x 100 x 100 میلی متر

فرم:

1 ورودی، 10 خروجی

فشار کاری:

ورودی: ≤20MPa؛ خروجی: ≤40MPa

دمای کاری:

≤320 ℃

ویسکوزیته سیال در حال چرخش:

≤4000 پویز

مقدار حداقل تعداد سفارش:

قیمت:

قابل مذاکره

جزئیات بسته بندی:

پرونده یا کارتن تخته سه لاو صعود استاندارد

زمان تحویل:

5-8 هفته

شرایط پرداخت:

L/C، D/A، D/P، T/T، وسترن یونیون

قابلیت ارائه:

زمان پخش فصل اوج: 1-3 ماه ，زمان ارائه فصل خارج از فصل: 1 ماه

توضیحات محصول

Hrb6 Chemical Fiber Spinning Pump Multi-Position Melt Delivery Gear Pump

Item	Specification
Model	HRB6-5.5
Displacement (per outlet)	5.5 cc/rev
Dimension A	79.3 mm
Overall Length (Dimension B)	123.1 mm
Overall Width (Outer Diameter)	100 mm
Overall Height (Outer Diameter)	100 mm
Mounting Screw	M12
Structure	1 Inlet, 6 Outlets
Max Inlet Pressure	≤20 MPa
Max Outlet Pressure	≤40 MPa
Max Working Temperature	≤320ºC
Applicable Viscosity	≤4000 POISE
Working Speed	5~40 rpm

Main Applications

Polyester/Nylon filament spinning production lines for stable melt metering and conveying

Spinning processes for specialty fibers such as polypropylene, spandex, and aramid

Production of non-woven materials like non-woven fabrics and acetate fibers

Metering and conveying of high-viscosity fluids in chemical and pharmaceutical industries

Product Advantages

High Precision Metering: Gear pump design ensures stable, consistent flow, minimizing fiber linear density variation.

High Temperature & Pressure Resistance: Alloy steel construction withstands up to 320ºC and 40MPa outlet pressure, suitable for high-viscosity polymer melts.

Multi-Outlet Design: 1-in 6-out structure supports multi-position spinning, improving production efficiency.

Reliable Sealing: High-temperature hard seal and axial balance design prevent leakage under continuous high-load conditions.

Standardized Installation: Flange mounting with M12 screws for easy integration and replacement on existing spinning equipment.

Model	Displacement (cc/rev)	Dimension A (mm)	Dimension B (Total Length, mm)	Mounting Screw
HRB6-0.6	0.6	62.5	104.5	M12
HRB6-1.2	1.2	64.6	106.6	M12
HRB6-1.8	1.8	66.4	108.4	M12
HRB6-2.0	2.0	67.0	109.0	M12
HRB6-2.4	2.4	68.4	110.4	M12
HRB6-3.0	3.0	70.5	112.5	M12
HRB6-3.6	3.6	72.6	114.6	M12
HRB6-4.0	4.0	74.0	117.8	M12
HRB6-4.5	4.5	75.8	119.6	M12
HRB6-5.0	5.0	77.6	121.3	M12
HRB6-5.5	5.5	79.3	123.1	M12
HRB6-6.0	6.0	81.1	124.9	M12
HRB6-6.5	6.5	82.9	126.7	M12

After Sales Service

Company Profile

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation.
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements.
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment.

Frequently Asked Questions

Q1: Are you a factory?

A1: We are based in Shanghai, China, start from 2011. Main production and sales of various industrial flow meters and other products. Welcome to visit!

Q2: What can you buy from us?

A2: We can provide one-stop flow meter services, providing sales of instruments such as flow meters, liquid level gauges, vacuum gauges, pumps, sensors, industrial thermometers, etc.

Q3: What is your terms of packing?

A3: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q4: How about your delivery time?

A4: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q5: What's your MOQ?

A5: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q6: How do you ensure good product quality?

A6: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q7: How long your quotation valid?

A7: Our quotation valid for 1 month.

Q8: Can you accept OEM brand?

A8: Yes, we can accept the OEM brand without extra charge.

Q9: How long is your product warranty?

A9: 7 days replacement and 12 months repair free of charge for quality problem.

Q10: Can you produce according to the samples?

A10: Yes, we can produce by your samples or technical drawings.

برچسب ها: