جزئیات محصولات

خونه > محصولات >

6-Outlet Gear Dosing Pump for Polypropylene/Nylon/Spandex Fiber Spinning Line

محصولات

6-Outlet Gear Dosing Pump for Polypropylene/Nylon/Spandex Fiber Spinning Line

مقدار تولیدی:	1
قیمت:	قابل مذاکره
بسته بندی استاندارد:	پرونده یا کارتن تخته سه لاو صعود استاندارد
دوره تحویل:	5-8 هفته
روش پرداخت:	L/C، D/A، D/P، T/T، وسترن یونیون
ظرفیت عرضه:	زمان پخش فصل اوج: 1-3 ماه ，زمان ارائه فصل خارج از فصل: 1 ماه

اطلاعات دقیق

توضیحات محصول

اطلاعات دقیق

نام تجاری

شماره مدل

HRA-1.8*6-2

استفاده اصلی:

اندازه گیری نخ ریسی پلی استر، نایلون

ساختار:

1 ورودی، 6 خروجی

جابجایی در هر بندر در هر انقلاب:

1.8 سی سی / برگردان

جابجایی کل (6 پورت):

10.8 سی سی / برگردان

فشار کاری:

ورودی: ≤20MPa؛ خروجی: ≤40MPa

دمای کاری:

≤320 ℃

ویسکوزیته سیال در حال چرخش:

≤4000 پویز

سرعت کار:

5 تا 40 دور در دقیقه

اندازه بندر ورودی:

φ15 میلی متر

اندازه پورت خروجی:

6 × φ6.4 میلی متر

مشخصات سوراخ نصب:

3 × φ12.5 میلی متر

قطر محور محرک:

φ20 میلی متر

برجسته کردن:

6-outlet metering pump for fiber spinning

polypropylene fiber dosing pump

nylon spandex metering pump

توضیحات محصول

6-Outlet Gear Dosing Pump for Polypropylene/Nylon/Spandex Fiber Spinning Line

This 1-inlet 6-outlet precision spinning gear pump is high-precision metering and conveying equipment specifically designed for chemical fiber spinning processes. Featuring precision gear meshing structure, it enables uniform flow distribution from a single inlet to 6 outlets, providing stable and accurate melt/oil agent conveying for polyester, nylon and other filament spinning processes. As a core component ensuring uniformity and continuity of spinning finished products, it is widely suitable for high-viscosity fluid metering scenarios across multiple industries.

Item	Specification
Model	HRA-1.8*6-2
Main Use	Polyester, Nylon Filament Spinning
Structure	1 Inlet, 6 Outlets
Displacement per Port per Revolution	1.8 cc/rev
Total Displacement	10.8 cc/rev
Working Speed	5-40 rpm
Working Pressure	Inlet ≤20 MPa; Outlet ≤40 MPa
Working Temperature	≤320 ºC
Suitable Viscosity	≤4000 POISE
Mounting Screw	M12
Dimension A (Pump Body Length)	107.6 mm
Dimension B (Total Length with Shaft)	115.6 mm
Overall Dimensions (L×W×H)	115.6 × 60 × 52 mm
Inlet Port Size	Φ15 mm
Outlet Port Size	6 × Φ6.4 mm
Drive Shaft Diameter	Φ20 mm
Mounting Hole Specification	3 × Φ12.5 mm

Main Applications

Core Industries: Chemical, chemical fiber, food, biology, medicine, etc.
Core Processes: Spinning forming of polypropylene, nylon, spandex, aramid, non-woven fabric, acetate fiber, etc.
Extended Applications: Precision oil metering, high-viscosity fluid booster conveying, special material extrusion supporting, etc.

Product Advantages

High metering accuracy: Uniform flow at 6 outlets with minimal error, eliminating uneven spinning thickness and broken filaments
High pressure and temperature resistance: Maximum outlet pressure of 40MPa, temperature resistance up to 320ºC, suitable for high-temperature and high-pressure spinning working conditions
Strong high-viscosity adaptability: Can transport high-viscosity spinning melt up to 4000POISE, meeting the stringent requirements of the chemical fiber industry
Complete specifications: Full displacement coverage of 0.8~4.5cc/rev, can accurately match spinning lines with different production capacities and processes
Standardized installation: Unified mounting flange and screw specifications for all models, facilitating line transformation and maintenance

Structural Interface Features

Mounting Flange: Φ60mm standard flange, 3 Φ12.5mm mounting holes
Shaft End Specification: Φ20mm output shaft, shaft extension length 14.38mm
Interface Specification: 1 Φ15mm inlet, 6 Φ6.4mm outlets

Model Specifications Comparison

Model	Output per Port per Revolution (cc/rev)	Dimension A (mm, Pump Body Length)	Dimension B (mm, Total Length with Shaft)	Mounting Screw
HRA-0.8*_6-_ 2	0.8	99.9	119.9	M12
HRA-1.2*_6-_ 2	1.2	101.2	109.2	M12
HRA-1.4*_6-_ 2	1.4	103.4	111.4	M12
HRA-1.6*_6-_ 2	1.6	105.5	113.5	M12
HRA-1.8*_6-_ 2	1.8	107.6	115.6	M12
HRA-2*_6-_ 2	2.0	109.7	117.7	M12
HRA-2.4*_6-_ 2	2.4	114.0	122.0	M12
HRA-3*_6-_ 2	3.0	127.6	135.6	M12
HRA-3.6*_6-_ 2	3.6	134.0	142.0	M12
HRA-4*_6-_ 2	4.0	133.5	130.5	M12
HRA-4.5*_6-_ 2	4.5	126.8	134.8	M12

After Sales Service

Enjoy peace of mind with our comprehensive after-sales service. We offer a 7-day replacement policy and a 12-month repair service absolutely free of charge for any quality-related issues, ensuring your complete satisfaction and confidence in our products.

Company Profile

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment

Frequently Asked Questions

Q1: What is your terms of packing?

A1: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q2: How about your delivery time?

A2: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q3: What's your MOQ?

A3: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q4: How do you ensure good product quality?

A4: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q5: How long your quotation valid?

A5: Our quotation valid for 1 month.

Q6: Can you accept OEM brand?

A6: Yes, we can accept the OEM brand without extra charge.

Q7: How long is your product warranty?

A7: 7 days replacement and 12 months repair free of charge for quality problem.

Q8: Can you produce according to the samples?

A8: Yes, we can produce by your samples or technical drawings.

برچسب ها:

پمپ چرخ دار سری HRB/JRG,

پمپ چرخ دار فیبر آریامید,

پمپ چرخ دار فیبر شیمیایی

محصولات پیشنهادی

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Chemical Fiber Melt

حالا تماس بگیرید

5-Outlet Gear Dosing Pump for Polypropylene/Spandex/Aramid Fiber Spinning Line

حالا تماس بگیرید

Hra Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

حالا تماس بگیرید

5-Outlet Gear Dosing Pump for Polypropylene/Spandex/Aramid Fiber Spinning Line

حالا تماس بگیرید

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Melt Metering

حالا تماس بگیرید

1.2~5.0cc/Rev Precision Spinning Metering Pump for High Viscosity Fluid

حالا تماس بگیرید

Hra Series 1-Inlet 5-Outlet Precision Spinning Metering Gear Pump for Chemical Fiber

حالا تماس بگیرید

جزئیات محصولات

محصولات

پمپ بازگردانی آب

کشاورزی پمپ آب

پمپ آب

پمپ گردش خون Grundfos

پمپ فاضلاب

سیستم اطفای حریق

سیستم هوای تازه

پمپ سانتریفیوژ

بوستر پمپ

درایوهای ABB

مرکز تراش عمودی

پمپ تقویت کننده در خط

مبدل حرارتی صفحه ای

مبدل

پمپ سنجش

6-Outlet Gear Dosing Pump for Polypropylene/Nylon/Spandex Fiber Spinning Line

مقدار تولیدی:	1
قیمت:	قابل مذاکره
بسته بندی استاندارد:	پرونده یا کارتن تخته سه لاو صعود استاندارد
دوره تحویل:	5-8 هفته
روش پرداخت:	L/C، D/A، D/P، T/T، وسترن یونیون
ظرفیت عرضه:	زمان پخش فصل اوج: 1-3 ماه ，زمان ارائه فصل خارج از فصل: 1 ماه

اطلاعات دقیق

توضیحات محصول

اطلاعات دقیق

نام تجاری

ZRQH

شماره مدل

HRA-1.8*6-2

استفاده اصلی:

اندازه گیری نخ ریسی پلی استر، نایلون

ساختار:

1 ورودی، 6 خروجی

جابجایی در هر بندر در هر انقلاب:

1.8 سی سی / برگردان

جابجایی کل (6 پورت):

10.8 سی سی / برگردان

فشار کاری:

ورودی: ≤20MPa؛ خروجی: ≤40MPa

دمای کاری:

≤320 ℃

ویسکوزیته سیال در حال چرخش:

≤4000 پویز

سرعت کار:

5 تا 40 دور در دقیقه

اندازه بندر ورودی:

φ15 میلی متر

اندازه پورت خروجی:

6 × φ6.4 میلی متر

مشخصات سوراخ نصب:

3 × φ12.5 میلی متر

قطر محور محرک:

φ20 میلی متر

مقدار حداقل تعداد سفارش:

قیمت:

قابل مذاکره

جزئیات بسته بندی:

پرونده یا کارتن تخته سه لاو صعود استاندارد

زمان تحویل:

5-8 هفته

شرایط پرداخت:

L/C، D/A، D/P، T/T، وسترن یونیون

قابلیت ارائه:

زمان پخش فصل اوج: 1-3 ماه ，زمان ارائه فصل خارج از فصل: 1 ماه

برجسته کردن

6-outlet metering pump for fiber spinning

polypropylene fiber dosing pump

nylon spandex metering pump

توضیحات محصول

6-Outlet Gear Dosing Pump for Polypropylene/Nylon/Spandex Fiber Spinning Line

Item	Specification
Model	HRA-1.8*6-2
Main Use	Polyester, Nylon Filament Spinning
Structure	1 Inlet, 6 Outlets
Displacement per Port per Revolution	1.8 cc/rev
Total Displacement	10.8 cc/rev
Working Speed	5-40 rpm
Working Pressure	Inlet ≤20 MPa; Outlet ≤40 MPa
Working Temperature	≤320 ºC
Suitable Viscosity	≤4000 POISE
Mounting Screw	M12
Dimension A (Pump Body Length)	107.6 mm
Dimension B (Total Length with Shaft)	115.6 mm
Overall Dimensions (L×W×H)	115.6 × 60 × 52 mm
Inlet Port Size	Φ15 mm
Outlet Port Size	6 × Φ6.4 mm
Drive Shaft Diameter	Φ20 mm
Mounting Hole Specification	3 × Φ12.5 mm

Main Applications

Core Industries: Chemical, chemical fiber, food, biology, medicine, etc.
Core Processes: Spinning forming of polypropylene, nylon, spandex, aramid, non-woven fabric, acetate fiber, etc.
Extended Applications: Precision oil metering, high-viscosity fluid booster conveying, special material extrusion supporting, etc.

Product Advantages

High metering accuracy: Uniform flow at 6 outlets with minimal error, eliminating uneven spinning thickness and broken filaments
High pressure and temperature resistance: Maximum outlet pressure of 40MPa, temperature resistance up to 320ºC, suitable for high-temperature and high-pressure spinning working conditions
Strong high-viscosity adaptability: Can transport high-viscosity spinning melt up to 4000POISE, meeting the stringent requirements of the chemical fiber industry
Complete specifications: Full displacement coverage of 0.8~4.5cc/rev, can accurately match spinning lines with different production capacities and processes
Standardized installation: Unified mounting flange and screw specifications for all models, facilitating line transformation and maintenance

Structural Interface Features

Mounting Flange: Φ60mm standard flange, 3 Φ12.5mm mounting holes
Shaft End Specification: Φ20mm output shaft, shaft extension length 14.38mm
Interface Specification: 1 Φ15mm inlet, 6 Φ6.4mm outlets

Model Specifications Comparison

Model	Output per Port per Revolution (cc/rev)	Dimension A (mm, Pump Body Length)	Dimension B (mm, Total Length with Shaft)	Mounting Screw
HRA-0.8*_6-_ 2	0.8	99.9	119.9	M12
HRA-1.2*_6-_ 2	1.2	101.2	109.2	M12
HRA-1.4*_6-_ 2	1.4	103.4	111.4	M12
HRA-1.6*_6-_ 2	1.6	105.5	113.5	M12
HRA-1.8*_6-_ 2	1.8	107.6	115.6	M12
HRA-2*_6-_ 2	2.0	109.7	117.7	M12
HRA-2.4*_6-_ 2	2.4	114.0	122.0	M12
HRA-3*_6-_ 2	3.0	127.6	135.6	M12
HRA-3.6*_6-_ 2	3.6	134.0	142.0	M12
HRA-4*_6-_ 2	4.0	133.5	130.5	M12
HRA-4.5*_6-_ 2	4.5	126.8	134.8	M12

After Sales Service

Company Profile

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment

Frequently Asked Questions

Q1: What is your terms of packing?

A1: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q2: How about your delivery time?

A2: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q3: What's your MOQ?

A3: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q4: How do you ensure good product quality?

A4: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q5: How long your quotation valid?

A5: Our quotation valid for 1 month.

Q6: Can you accept OEM brand?

A6: Yes, we can accept the OEM brand without extra charge.

Q7: How long is your product warranty?

A7: 7 days replacement and 12 months repair free of charge for quality problem.

Q8: Can you produce according to the samples?

A8: Yes, we can produce by your samples or technical drawings.

برچسب ها: