DETALLES DE LOS PRODUCTOS

Hogar > Productos >

Hra Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

Productos

Bomba de recirculación de agua

Bomba de agua de la agricultura

bomba de circulación de los grundfos

sistema de la lucha contra el fuego

Centro de rectificado vertical

Intercambiador de calor de placa

Hra Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

MOQ:	1
Precio:	Negociable
Embalaje Estándar:	Estuche de madera contrachapada de exportación estándar o cartón
Período De Entrega:	5-8 semanas
Método De Pago:	LC, D/A, D/P, T/T, Unión Occidental
Capacidad De Suministro:	Tiempo de entrega en temporada alta: 1-3 meses; Tiempo de entrega fuera de temporada: 1 mes

Información detallada

Descripción de producto

Información detallada

Nombre de la marca

Número de modelo

HRA-2.4*6-2

Uso principal:

Medición de hilado de filamentos de poliéster y nailon

Estructura:

1 entrada, 6 salidas

Desplazamiento por puerto por revolución:

2,4 cc/revolución

Desplazamiento Total (6 Puertos):

14,4 cc/revolución

Presión de trabajo:

Entrada: ≤20MPa; Salida: ≤40MPa

Temperatura de trabajo:

≤320 ℃

Viscosidad del fluido de hilatura:

≤4000 equilibrio

Velocidad de trabajo:

5~40 rpm

Tamaño del puerto de entrada:

ø15mm

Tamaño del puerto de salida:

6 × φ6,4 mm

Especificación del orificio de montaje:

3 × ø12,5 mm

Diámetro del eje impulsor:

ø20mm

Resaltar:

precision spinning gear pump

non-woven fabric metering pump

acetate fiber gear pump

Descripción de producto

HRA Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

This 1-inlet 6-outlet precision spinning gear pump is a high-precision metering and conveying equipment specially designed for chemical fiber spinning process. With precision gear meshing structure, it can realize uniform flow distribution from a single inlet to 6 outlets, providing stable and accurate melt/oil agent conveying for polyester, nylon and other filament spinning processes. It is the core component to ensure the uniformity and continuity of spinning finished products, and is widely suitable for high-viscosity fluid metering scenarios in many industries.

Technical Specifications

Model	HRA-2.4*6-2
Main Use	Polyester, Nylon Filament Spinning
Structure	1 Inlet, 6 Outlets
Displacement per Port per Revolution	2.4 cc/rev
Total Displacement	14.4 cc/rev
Working Speed	5-40 rpm
Working Pressure	Inlet ≤20 MPa; Outlet ≤40 MPa
Working Temperature	≤320 ºC
Suitable Viscosity	≤4000 POISE
Mounting Screw	M12
Dimension A (Pump Body Length)	114.0 mm
Dimension B (Total Length with Shaft)	122.0 mm
Overall Dimensions (L×W×H)	122.0 × 60 × 52 mm
Inlet Port Size	Φ15 mm
Outlet Port Size	6 × Φ6.4 mm
Drive Shaft Diameter	Φ20 mm
Mounting Hole Specification	3 × Φ12.5 mm

Main Applications

Core Industries: Chemical, chemical fiber, food, biology, medicine, etc.
Core Processes: Spinning forming of polypropylene, nylon, spandex, aramid, non-woven fabric, acetate fiber, etc.
Extended Applications: Precision oil metering, high-viscosity fluid booster conveying, special material extrusion supporting, etc.

Product Advantages

High metering accuracy: Uniform flow at 6 outlets with minimal error, eliminating uneven spinning thickness and broken filaments
High pressure and temperature resistance: Maximum outlet pressure of 40MPa, temperature resistance up to 320ºC, suitable for high-temperature and high-pressure spinning working conditions
Strong high-viscosity adaptability: Can transport high-viscosity spinning melt up to 4000POISE, meeting the stringent requirements of the chemical fiber industry
Complete specifications: Full displacement coverage of 0.8~4.5cc/rev, can accurately match spinning lines with different production capacities and processes
Standardized installation: Unified mounting flange and screw specifications for all models, facilitating line transformation and maintenance

Structural Interface Features

Mounting Flange: Φ60mm standard flange, 3 Φ12.5mm mounting holes
Shaft End Specification: Φ20mm output shaft, shaft extension length 14.38mm
Interface Specification: 1 Φ15mm inlet, 6 Φ6.4mm outlets

Model Specifications

Model	Output per Port per Revolution (cc/rev)	Dimension A (mm, Pump Body Length)	Dimension B (mm, Total Length with Shaft)	Mounting Screw
HRA-0.8*_6-_ 2	0.8	99.9	119.9	M12
HRA-1.2*_6-_ 2	1.2	101.2	109.2	M12
HRA-1.4*_6-_ 2	1.4	103.4	111.4	M12
HRA-1.6*_6-_ 2	1.6	105.5	113.5	M12
HRA-1.8*_6-_ 2	1.8	107.6	115.6	M12
HRA-2*_6-_ 2	2.0	109.7	117.7	M12
HRA-2.4*_6-_ 2	2.4	114.0	122.0	M12
HRA-3*_6-_ 2	3.0	127.6	135.6	M12
HRA-3.6*_6-_ 2	3.6	134.0	142.0	M12
HRA-4*_6-_ 2	4.0	133.5	130.5	M12
HRA-4.5*_6-_ 2	4.5	126.8	134.8	M12

After Sales Service

Enjoy peace of mind with our comprehensive after-sales service. We offer a 7-day replacement policy and a 12-month repair service absolutely free of charge for any quality-related issues, ensuring your complete satisfaction and confidence in our products.

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment

Frequently Asked Questions

Q1: Are you a factory?

A1: We are based in Shanghai, China, start from 2011. Main production and sales of various industrial flow meters and other products. Welcome to visit!

Q2: What can you buy from us?

A2: We can provide one-stop flow meter services, providing sales of instruments such as flow meters, liquid level gauges, vacuum gauges, pumps, sensors, industrial thermometers, etc.

Q3: What is your terms of packing?

A3: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q4: How about your delivery time?

A4: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q5: What's your MOQ?

A5: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q6: How do you ensure good product quality?

A6: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q7: How long your quotation valid?

A7: Our quotation valid for 1 month.

Q8: Can you accept OEM brand?

A8: Yes, we can accept the OEM brand without extra charge.

Q9: How long is your product warranty?

A9: 7 days replacement and 12 months repair free of charge for quality problem.

Q10: Can you produce according to the samples?

A10: Yes, we can produce by your samples or technical drawings.

Etiquetas:

La serie HRB/JRG de bombas de engranajes giratorios,

bomba de engranajes de hilado de fibra de aramida,

bomba de hilatura de fibras químicas

Productos recomendados

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Chemical Fiber Melt

Contacto ahora

6-Outlet Gear Dosing Pump for Polypropylene/Nylon/Spandex Fiber Spinning Line

Contacto ahora

5-Outlet Gear Dosing Pump for Polypropylene/Spandex/Aramid Fiber Spinning Line

Contacto ahora

5-Outlet Gear Dosing Pump for Polypropylene/Spandex/Aramid Fiber Spinning Line

Contacto ahora

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Melt Metering

Contacto ahora

1.2~5.0cc/Rev Precision Spinning Metering Pump for High Viscosity Fluid

Contacto ahora

Hra Series 1-Inlet 5-Outlet Precision Spinning Metering Gear Pump for Chemical Fiber

Contacto ahora

DETALLES DE LOS PRODUCTOS

Productos

Bomba de recirculación de agua

Bomba de agua de la agricultura

Bomba de suministro de agua

bomba de circulación de los grundfos

Bomba de aguas residuales

sistema de la lucha contra el fuego

sistema de aire fresco

Bomba centrífuga

Bombas de aumento de presión

impulsiones del abb

Centro de rectificado vertical

Bomba de refuerzo en línea

Intercambiador de calor de placa

Intercambiador de calor

Bomba de medición

Hra Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

MOQ:	1
Precio:	Negociable
Embalaje Estándar:	Estuche de madera contrachapada de exportación estándar o cartón
Período De Entrega:	5-8 semanas
Método De Pago:	LC, D/A, D/P, T/T, Unión Occidental
Capacidad De Suministro:	Tiempo de entrega en temporada alta: 1-3 meses; Tiempo de entrega fuera de temporada: 1 mes

Información detallada

Descripción de producto

Información detallada

Nombre de la marca

ZRQH

Número de modelo

HRA-2.4*6-2

Uso principal:

Medición de hilado de filamentos de poliéster y nailon

Estructura:

1 entrada, 6 salidas

Desplazamiento por puerto por revolución:

2,4 cc/revolución

Desplazamiento Total (6 Puertos):

14,4 cc/revolución

Presión de trabajo:

Entrada: ≤20MPa; Salida: ≤40MPa

Temperatura de trabajo:

≤320 ℃

Viscosidad del fluido de hilatura:

≤4000 equilibrio

Velocidad de trabajo:

5~40 rpm

Tamaño del puerto de entrada:

ø15mm

Tamaño del puerto de salida:

6 × φ6,4 mm

Especificación del orificio de montaje:

3 × ø12,5 mm

Diámetro del eje impulsor:

ø20mm

Cantidad de orden mínima:

Precio:

Negociable

Detalles de empaquetado:

Estuche de madera contrachapada de exportación estándar o cartón

Tiempo de entrega:

5-8 semanas

Condiciones de pago:

LC, D/A, D/P, T/T, Unión Occidental

Capacidad de la fuente:

Tiempo de entrega en temporada alta: 1-3 meses; Tiempo de entrega fuera de temporada: 1 mes

Resaltar

precision spinning gear pump

non-woven fabric metering pump

acetate fiber gear pump

Descripción de producto

HRA Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

Technical Specifications

Model	HRA-2.4*6-2
Main Use	Polyester, Nylon Filament Spinning
Structure	1 Inlet, 6 Outlets
Displacement per Port per Revolution	2.4 cc/rev
Total Displacement	14.4 cc/rev
Working Speed	5-40 rpm
Working Pressure	Inlet ≤20 MPa; Outlet ≤40 MPa
Working Temperature	≤320 ºC
Suitable Viscosity	≤4000 POISE
Mounting Screw	M12
Dimension A (Pump Body Length)	114.0 mm
Dimension B (Total Length with Shaft)	122.0 mm
Overall Dimensions (L×W×H)	122.0 × 60 × 52 mm
Inlet Port Size	Φ15 mm
Outlet Port Size	6 × Φ6.4 mm
Drive Shaft Diameter	Φ20 mm
Mounting Hole Specification	3 × Φ12.5 mm

Main Applications

Core Industries: Chemical, chemical fiber, food, biology, medicine, etc.
Core Processes: Spinning forming of polypropylene, nylon, spandex, aramid, non-woven fabric, acetate fiber, etc.
Extended Applications: Precision oil metering, high-viscosity fluid booster conveying, special material extrusion supporting, etc.

Product Advantages

High metering accuracy: Uniform flow at 6 outlets with minimal error, eliminating uneven spinning thickness and broken filaments
High pressure and temperature resistance: Maximum outlet pressure of 40MPa, temperature resistance up to 320ºC, suitable for high-temperature and high-pressure spinning working conditions
Strong high-viscosity adaptability: Can transport high-viscosity spinning melt up to 4000POISE, meeting the stringent requirements of the chemical fiber industry
Complete specifications: Full displacement coverage of 0.8~4.5cc/rev, can accurately match spinning lines with different production capacities and processes
Standardized installation: Unified mounting flange and screw specifications for all models, facilitating line transformation and maintenance

Structural Interface Features

Mounting Flange: Φ60mm standard flange, 3 Φ12.5mm mounting holes
Shaft End Specification: Φ20mm output shaft, shaft extension length 14.38mm
Interface Specification: 1 Φ15mm inlet, 6 Φ6.4mm outlets

Model Specifications

Model	Output per Port per Revolution (cc/rev)	Dimension A (mm, Pump Body Length)	Dimension B (mm, Total Length with Shaft)	Mounting Screw
HRA-0.8*_6-_ 2	0.8	99.9	119.9	M12
HRA-1.2*_6-_ 2	1.2	101.2	109.2	M12
HRA-1.4*_6-_ 2	1.4	103.4	111.4	M12
HRA-1.6*_6-_ 2	1.6	105.5	113.5	M12
HRA-1.8*_6-_ 2	1.8	107.6	115.6	M12
HRA-2*_6-_ 2	2.0	109.7	117.7	M12
HRA-2.4*_6-_ 2	2.4	114.0	122.0	M12
HRA-3*_6-_ 2	3.0	127.6	135.6	M12
HRA-3.6*_6-_ 2	3.6	134.0	142.0	M12
HRA-4*_6-_ 2	4.0	133.5	130.5	M12
HRA-4.5*_6-_ 2	4.5	126.8	134.8	M12

After Sales Service

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment

Frequently Asked Questions

Q1: Are you a factory?

A1: We are based in Shanghai, China, start from 2011. Main production and sales of various industrial flow meters and other products. Welcome to visit!

Q2: What can you buy from us?

A2: We can provide one-stop flow meter services, providing sales of instruments such as flow meters, liquid level gauges, vacuum gauges, pumps, sensors, industrial thermometers, etc.

Q3: What is your terms of packing?

A3: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q4: How about your delivery time?

A4: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q5: What's your MOQ?

A5: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q6: How do you ensure good product quality?

A6: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q7: How long your quotation valid?

A7: Our quotation valid for 1 month.

Q8: Can you accept OEM brand?

A8: Yes, we can accept the OEM brand without extra charge.

Q9: How long is your product warranty?

A9: 7 days replacement and 12 months repair free of charge for quality problem.

Q10: Can you produce according to the samples?

A10: Yes, we can produce by your samples or technical drawings.

Etiquetas: