تفاصيل المنتجات

المنزل > المنتجات >

Hra Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

المنتجات

مضخة الدورة الدموية لـ Grundfos

Hra Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

الـ MOQ:	1
السعر:	قابل للتفاوض
العبوة القياسية:	علبة الخشب الرقائقي الصادر القياسي أو الكرتون
فترة التسليم:	5-8 أسابيع
طريقة الدفع:	خطاب الاعتماد، D/A، D/P، T/T، ويسترن يونيون
قدرة التوريد:	مهلة موسم الذروة: 1-3 أشهر، مهلة خارج الموسم: شهر واحد

معلومات مفصلة

وصف المنتج

معلومات مفصلة

اسم العلامة التجارية

رقم الموديل

HRA-2.4*6-2

الاستخدام الرئيسي:

قياس غزل خيوط البوليستر والنايلون

بناء:

1 مدخل، 6 منافذ

النزوح لكل ميناء لكل ثورة:

2.4 سم مكعب/قس

إجمالي النزوح (6 منافذ):

14.4 سم مكعب/قس

ضغط العمل:

مدخل: .20MPa؛ المخرج: ≥40MPa

درجة حرارة العمل:

≥320 درجة مئوية

لزوجة سائل الغزل:

≥4000 اتزان

سرعة العمل:

5 ~ 40 دورة في الدقيقة

حجم منفذ مدخل:

φ15 ملم

حجم منفذ المخرج:

6 × φ6.4 ملم

مواصفات فتحة التركيب:

3 × φ12.5 ملم

قطر رمح القيادة:

φ20 ملم

إبراز:

precision spinning gear pump

non-woven fabric metering pump

acetate fiber gear pump

وصف المنتج

HRA Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

This 1-inlet 6-outlet precision spinning gear pump is a high-precision metering and conveying equipment specially designed for chemical fiber spinning process. With precision gear meshing structure, it can realize uniform flow distribution from a single inlet to 6 outlets, providing stable and accurate melt/oil agent conveying for polyester, nylon and other filament spinning processes. It is the core component to ensure the uniformity and continuity of spinning finished products, and is widely suitable for high-viscosity fluid metering scenarios in many industries.

Technical Specifications

Model	HRA-2.4*6-2
Main Use	Polyester, Nylon Filament Spinning
Structure	1 Inlet, 6 Outlets
Displacement per Port per Revolution	2.4 cc/rev
Total Displacement	14.4 cc/rev
Working Speed	5-40 rpm
Working Pressure	Inlet ≤20 MPa; Outlet ≤40 MPa
Working Temperature	≤320 ºC
Suitable Viscosity	≤4000 POISE
Mounting Screw	M12
Dimension A (Pump Body Length)	114.0 mm
Dimension B (Total Length with Shaft)	122.0 mm
Overall Dimensions (L×W×H)	122.0 × 60 × 52 mm
Inlet Port Size	Φ15 mm
Outlet Port Size	6 × Φ6.4 mm
Drive Shaft Diameter	Φ20 mm
Mounting Hole Specification	3 × Φ12.5 mm

Main Applications

Core Industries: Chemical, chemical fiber, food, biology, medicine, etc.
Core Processes: Spinning forming of polypropylene, nylon, spandex, aramid, non-woven fabric, acetate fiber, etc.
Extended Applications: Precision oil metering, high-viscosity fluid booster conveying, special material extrusion supporting, etc.

Product Advantages

High metering accuracy: Uniform flow at 6 outlets with minimal error, eliminating uneven spinning thickness and broken filaments
High pressure and temperature resistance: Maximum outlet pressure of 40MPa, temperature resistance up to 320ºC, suitable for high-temperature and high-pressure spinning working conditions
Strong high-viscosity adaptability: Can transport high-viscosity spinning melt up to 4000POISE, meeting the stringent requirements of the chemical fiber industry
Complete specifications: Full displacement coverage of 0.8~4.5cc/rev, can accurately match spinning lines with different production capacities and processes
Standardized installation: Unified mounting flange and screw specifications for all models, facilitating line transformation and maintenance

Structural Interface Features

Mounting Flange: Φ60mm standard flange, 3 Φ12.5mm mounting holes
Shaft End Specification: Φ20mm output shaft, shaft extension length 14.38mm
Interface Specification: 1 Φ15mm inlet, 6 Φ6.4mm outlets

Model Specifications

Model	Output per Port per Revolution (cc/rev)	Dimension A (mm, Pump Body Length)	Dimension B (mm, Total Length with Shaft)	Mounting Screw
HRA-0.8*_6-_ 2	0.8	99.9	119.9	M12
HRA-1.2*_6-_ 2	1.2	101.2	109.2	M12
HRA-1.4*_6-_ 2	1.4	103.4	111.4	M12
HRA-1.6*_6-_ 2	1.6	105.5	113.5	M12
HRA-1.8*_6-_ 2	1.8	107.6	115.6	M12
HRA-2*_6-_ 2	2.0	109.7	117.7	M12
HRA-2.4*_6-_ 2	2.4	114.0	122.0	M12
HRA-3*_6-_ 2	3.0	127.6	135.6	M12
HRA-3.6*_6-_ 2	3.6	134.0	142.0	M12
HRA-4*_6-_ 2	4.0	133.5	130.5	M12
HRA-4.5*_6-_ 2	4.5	126.8	134.8	M12

After Sales Service

Enjoy peace of mind with our comprehensive after-sales service. We offer a 7-day replacement policy and a 12-month repair service absolutely free of charge for any quality-related issues, ensuring your complete satisfaction and confidence in our products.

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment

Frequently Asked Questions

Q1: Are you a factory?

A1: We are based in Shanghai, China, start from 2011. Main production and sales of various industrial flow meters and other products. Welcome to visit!

Q2: What can you buy from us?

A2: We can provide one-stop flow meter services, providing sales of instruments such as flow meters, liquid level gauges, vacuum gauges, pumps, sensors, industrial thermometers, etc.

Q3: What is your terms of packing?

A3: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q4: How about your delivery time?

A4: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q5: What's your MOQ?

A5: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q6: How do you ensure good product quality?

A6: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q7: How long your quotation valid?

A7: Our quotation valid for 1 month.

Q8: Can you accept OEM brand?

A8: Yes, we can accept the OEM brand without extra charge.

Q9: How long is your product warranty?

A9: 7 days replacement and 12 months repair free of charge for quality problem.

Q10: Can you produce according to the samples?

A10: Yes, we can produce by your samples or technical drawings.

العلامات:

مضخة العربات الدوارة من سلسلة HRB/JRG,مضخة أدوات الغزل من الألياف الأراميدية,مضخة غزل الألياف الكيماوية,

precision spinning gear pump,non-woven fabric metering pump,acetate fiber gear pump,

chemical fiber spinning pump

المنتجات الموصى بها

40MPa High Pressure 320℃ High Temperature Spinning Gear Pump for Melt Metering

اتصل الآن

1.2~5.0cc/Rev Precision Spinning Metering Pump for High Viscosity Fluid

اتصل الآن

Hra Series 1-Inlet 5-Outlet Precision Spinning Metering Gear Pump for Chemical Fiber

اتصل الآن

Multi-Outlet Spinning Metering Pump for Polyester/Nylon/Polypropylene Production

اتصل الآن

High Temperature Resistant 320℃ Hrb6 Spinning Metering Pump for Polyester Nylon Filament

اتصل الآن

Hrb4 Series 0.6-3.6cc/Rev 1-Inlet 4-Outlet Chemical Fiber Spinning Pump for Polyester

اتصل الآن

High Pressure High Temp Gear Pump for Chemical Fiber & Nonwoven Fabric

اتصل الآن

تفاصيل المنتجات

المنتجات

مضخة تدوير المياه

الزراعة مضخة المياه

مضخة إمداد المياه

مضخة الدورة الدموية لـ Grundfos

مضخة الصرف الصحي

نظام مكافحة الحرائق

نظام الهواء النقي

مضخة طرد مركزي

مضخات التعزيز

محركات أبو

مركز طحن عمودي

مضخة الإرتفاع في الخط

صفيحة تبادل حرارة

مبادل حراري

مضخة القياس

Hra Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

الـ MOQ:	1
السعر:	قابل للتفاوض
العبوة القياسية:	علبة الخشب الرقائقي الصادر القياسي أو الكرتون
فترة التسليم:	5-8 أسابيع
طريقة الدفع:	خطاب الاعتماد، D/A، D/P، T/T، ويسترن يونيون
قدرة التوريد:	مهلة موسم الذروة: 1-3 أشهر، مهلة خارج الموسم: شهر واحد

معلومات مفصلة

وصف المنتج

معلومات مفصلة

اسم العلامة التجارية

ZRQH

رقم الموديل

HRA-2.4*6-2

الاستخدام الرئيسي:

قياس غزل خيوط البوليستر والنايلون

بناء:

1 مدخل، 6 منافذ

النزوح لكل ميناء لكل ثورة:

2.4 سم مكعب/قس

إجمالي النزوح (6 منافذ):

14.4 سم مكعب/قس

ضغط العمل:

مدخل: .20MPa؛ المخرج: ≥40MPa

درجة حرارة العمل:

≥320 درجة مئوية

لزوجة سائل الغزل:

≥4000 اتزان

سرعة العمل:

5 ~ 40 دورة في الدقيقة

حجم منفذ مدخل:

φ15 ملم

حجم منفذ المخرج:

6 × φ6.4 ملم

مواصفات فتحة التركيب:

3 × φ12.5 ملم

قطر رمح القيادة:

φ20 ملم

الحد الأدنى لكمية:

الأسعار:

قابل للتفاوض

تفاصيل التغليف:

علبة الخشب الرقائقي الصادر القياسي أو الكرتون

وقت التسليم:

5-8 أسابيع

شروط الدفع:

خطاب الاعتماد، D/A، D/P، T/T، ويسترن يونيون

القدرة على العرض:

مهلة موسم الذروة: 1-3 أشهر، مهلة خارج الموسم: شهر واحد

إبراز

precision spinning gear pump

non-woven fabric metering pump

acetate fiber gear pump

وصف المنتج

HRA Precision Spinning Gear Pump for Non-Woven Fabric & Acetate Fiber

Technical Specifications

Model	HRA-2.4*6-2
Main Use	Polyester, Nylon Filament Spinning
Structure	1 Inlet, 6 Outlets
Displacement per Port per Revolution	2.4 cc/rev
Total Displacement	14.4 cc/rev
Working Speed	5-40 rpm
Working Pressure	Inlet ≤20 MPa; Outlet ≤40 MPa
Working Temperature	≤320 ºC
Suitable Viscosity	≤4000 POISE
Mounting Screw	M12
Dimension A (Pump Body Length)	114.0 mm
Dimension B (Total Length with Shaft)	122.0 mm
Overall Dimensions (L×W×H)	122.0 × 60 × 52 mm
Inlet Port Size	Φ15 mm
Outlet Port Size	6 × Φ6.4 mm
Drive Shaft Diameter	Φ20 mm
Mounting Hole Specification	3 × Φ12.5 mm

Main Applications

Core Industries: Chemical, chemical fiber, food, biology, medicine, etc.
Core Processes: Spinning forming of polypropylene, nylon, spandex, aramid, non-woven fabric, acetate fiber, etc.
Extended Applications: Precision oil metering, high-viscosity fluid booster conveying, special material extrusion supporting, etc.

Product Advantages

High metering accuracy: Uniform flow at 6 outlets with minimal error, eliminating uneven spinning thickness and broken filaments
High pressure and temperature resistance: Maximum outlet pressure of 40MPa, temperature resistance up to 320ºC, suitable for high-temperature and high-pressure spinning working conditions
Strong high-viscosity adaptability: Can transport high-viscosity spinning melt up to 4000POISE, meeting the stringent requirements of the chemical fiber industry
Complete specifications: Full displacement coverage of 0.8~4.5cc/rev, can accurately match spinning lines with different production capacities and processes
Standardized installation: Unified mounting flange and screw specifications for all models, facilitating line transformation and maintenance

Structural Interface Features

Mounting Flange: Φ60mm standard flange, 3 Φ12.5mm mounting holes
Shaft End Specification: Φ20mm output shaft, shaft extension length 14.38mm
Interface Specification: 1 Φ15mm inlet, 6 Φ6.4mm outlets

Model Specifications

Model	Output per Port per Revolution (cc/rev)	Dimension A (mm, Pump Body Length)	Dimension B (mm, Total Length with Shaft)	Mounting Screw
HRA-0.8*_6-_ 2	0.8	99.9	119.9	M12
HRA-1.2*_6-_ 2	1.2	101.2	109.2	M12
HRA-1.4*_6-_ 2	1.4	103.4	111.4	M12
HRA-1.6*_6-_ 2	1.6	105.5	113.5	M12
HRA-1.8*_6-_ 2	1.8	107.6	115.6	M12
HRA-2*_6-_ 2	2.0	109.7	117.7	M12
HRA-2.4*_6-_ 2	2.4	114.0	122.0	M12
HRA-3*_6-_ 2	3.0	127.6	135.6	M12
HRA-3.6*_6-_ 2	3.6	134.0	142.0	M12
HRA-4*_6-_ 2	4.0	133.5	130.5	M12
HRA-4.5*_6-_ 2	4.5	126.8	134.8	M12

After Sales Service

Packaging & Shipping

Standard export wooden case packaging to protect the pump from damage during transportation
Support multiple shipping methods (sea, air, express) to meet different delivery time requirements
Complete product documents (operation manual, test report, quality certificate) are provided with each shipment

Frequently Asked Questions

Q1: Are you a factory?

A1: We are based in Shanghai, China, start from 2011. Main production and sales of various industrial flow meters and other products. Welcome to visit!

Q2: What can you buy from us?

A2: We can provide one-stop flow meter services, providing sales of instruments such as flow meters, liquid level gauges, vacuum gauges, pumps, sensors, industrial thermometers, etc.

Q3: What is your terms of packing?

A3: Generally, JSN brand colorful cardboard boxes packing. OEM brand brown cardboard boxes packing.

Q4: How about your delivery time?

A4: Generally, standard type: 6-7 working days after confirm the order. Non-standard type: 8-10 working days after confirm the order.

Q5: What's your MOQ?

A5: We have no MOQ demand, 1 piece for test purpose at first is acceptable.

Q6: How do you ensure good product quality?

A6: We have a complete quality control system; All of our products are fully checked by IQC, OQC departments before ship to our clients.

Q7: How long your quotation valid?

A7: Our quotation valid for 1 month.

Q8: Can you accept OEM brand?

A8: Yes, we can accept the OEM brand without extra charge.

Q9: How long is your product warranty?

A9: 7 days replacement and 12 months repair free of charge for quality problem.

Q10: Can you produce according to the samples?

A10: Yes, we can produce by your samples or technical drawings.

العلامات: